Angel roll forming machine to Russia on July 10,2020
Publish Time: 2020-07-13 Origin: Site
Angel roll forming machine to Russia on July 10,2020
Technical Parameters :
1) Suitable Coil Thickness: 1.5mm -4.0mm
2) Max. Coil Width: as per drawing
3) Suitable Raw Materials: ST 350 TOCT 19904-90 Steel
(As your material is special, please provide us testing coil then)
4) Yield Strength of Raw Material: 500Mpa (Please confirm the material yield strength)
5) Forming Speed: Max. about 18m/min.(not include punching and cutting)
6) Main Motor Power: 5.5X2KW(Depends on design)
7) Hydraulic station motor power: 5.5KW(Depends on design)
8) Manual Decoiler Max. Capacity: 3000kgs
9) Control system Mitsubishi PLC and Frequency converter
10) Machine layout dimension about 12m×1.8m×1.7m
MACHINE COMPONENTS:
(1) Manual decoiler 1 set (Capacity: 3 tons)
(2) Leveling device 1 set (4 upper+5 down structure)
(3) Punching device 2 sets (Per set for one hole)
(4) Cutting device 2 sets (Pre-cutting&Post cutting )
(5) Roll-Forming M/C 1 set
(6) Hydraulic station 1 set
(7) PLC control system 1 set
(8) Product Rack (un-powered) 1 set (two pieces, total length is 3 meters)
(9) Tool Box 1 set
DELIVERY: The machines will be ready within 100 days from receipt of down payment as well as approval of sales contract, technical scheme and profile drawing. The shipment will be made within 10 days after the seller receives the balance by T/T.
Angel roll forming machine in our factory, it can be used to forming max. 4mm thickness metal angel. Designed gear box transmission.
Angel produced from Zhongyuan angel roll forming machine
Contact Us:
Email: zhongyuanforming@hotmail.com
Mob. / Wechat / Whatsapp: +86 13867521382